If you like this post, help us share it
Here is a comparison of the NR results (100% crop 800×600) from the five different NR software. The NR settings used are as follows:
- Lightroom 2 – 70% luminance, 80% colour
- Lightroom 3 – 70% luminance, 80% colour
- Noise Ninja – Default settings, automatic profiling
- Noiseware Professional – Default settings, automatic profiling
- Define 2 – Default settings, automatic profiling
- DxO 6 – Default settings, automatic profiling
My preferences
- LR2 – Maintain a lot of details similar to the original, some noise still presence
- Noiseware Professional – Similar results to LR2, but reduced contrast
- DxO 6 – Still some noise especially chromatic noise, a bit smudged
- LR3 – Very clean , but image became a bit soft. Perhaps a lower NR setting will help
- Define 2 – Similar results to LR3, but losing contrast and details
- NoiseNinja – Feels a bit smudged, image became a bit soft, losing contrast and details
Second test image – An image of Xiamen skyline taken with a Nikon D700 @ ISO5000, f/2.8. It also has a lot of dark/shadow areas where noise is a lot less tolerant.
Here is a comparison of the NR results (100% crop 800×600) from the five different NR software. The NR settings used are as follows:
- Lightroom 2 – 70% luminance, 80% colour
- Lightroom 3 – 70% luminance, 80% colour
- Noise Ninja – Default settings, automatic profiling
- Noiseware Professional – Default settings, automatic profiling
- Define 2 – Default settings, automatic profiling
- DxO 6 – Default settings, automatic profiling
My preferences
- NoiseNinja – Some noise remains, but maintained most details and contrast
- DxO 6 – Some noise remains, a slightly soft
- Define 2 – Some smudged and image became soft
- LR3 – Very soft, but not as patchy as others
- LR2 – Smudged and patchy, image became soft
- Noiseware Professional – Smudged and appears to have halo effect
Remarks
LR3’s NR algorithm is capable of removing image noise very well without adding artifacts to the image. However, in the test results above, the images became a bit soft. Perhaps the NR settings at 70% luminance and 80% colour were too strong. NR is a compromise really, you are prone to lose some of image details (i.e. image becomes soft) when you remove too much noise.
Where can I find the equipment seen on this site?
If you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video or through any of the affiliate links seen on this site.
James, you are correct, having been using LR3 for quite some time now, I also noticed that it actually doesn't need that high (70%) to remove noise to an acceptable level.
thanks for your comment.
For what it's worth, I've been loving LR3 noise reduction but I'd NEVER use settings as high as you have. Most of my images use something like 0% luminance and 25% colour. As a general rule it's the luminance slider that makes the image soft, personally I prefer the slight "grain" look in LR3 (with a luminance of 0) but obviously you can choose to remove this if you like but even then I wouldn't go above 50 even with an ISO 3200 image.
Thanks for the comparisons. I've been trying to decide whether it's worth getting NoiseWare Professional on top of processing through Lightroom 3. Not sure it's necessary given your tests (and my own)…